NOVQO WLL-01 Painters’ Light, 15 W, 700–1,500 lm

About the product

NOVQO WLL-01 Painter’s Lamp for Precise Surface Inspection

The NOVQO WLL-01 is a professional network-powered inspection lamp designed for inspecting walls and ceilings during spackling, sanding, and preparation for painting. Its narrow, sweeping beam travels along the surface and highlights minor irregularities that might go unnoticed under normal lighting conditions.

The lamp helps you see scratches left after sanding, pores, pitting, putty marks, ripples, surface irregularities, and uneven joints in drywall. This allows the contractor to correct these imperfections before applying primer or paint and avoid unnecessary rework.

Consistent light throughout operation

Mains power ensures consistent brightness without interruptions for charging. The light output is adjustable between 700 and 1,500 lumens, making it easy to configure the lamp for both close-up inspection and checking large areas.

Narrow projection beam: 120° × 5°

The 120°×5° beam angle provides wide surface coverage and creates a narrow beam of light. When the lamp is positioned close to the wall, even small imperfections cast contrasting shadows and become clearly visible.

Advantages of the NOVQO WLL-01

• adjustable light output of 700–1,500 lm;
• power: 15 W;
• 120°×5° beam angle;
• stable operation from a 100–240 V power supply;
• an 8-meter cable;
• IP44 enclosure rating;
• IP64 protection rating for the LED module;
• can be mounted on a tripod;
• A carrying case is included.

What defects does it help detect?

• scratches left by sanding;
• pores and cavities in the putty;
• marks and ridges left by the putty knife;
• waves and local variations in the plane;
• uneven joints between drywall sheets;
• defects in priming or painting.

Scope of Application

This lamp is suitable for professional painters, plasterers, drywall installers, and finishing crews. It can be used to inspect walls, ceilings, slopes, corners, niches, and specific repair areas.

How to Use

Place the lamp close to the surface and direct the beam along the wall or ceiling. Slowly move the lamp while observing the shadows. For more precise control, check a single area from several angles.

Technical Specifications

• Brand: NOVQO
• Model: WLL-01
• Type: Mains-powered painter’s exposure lamp
• Power: 15 W
• Luminous flux: 700–1,500 lm
• Beam angle: 120° × 5°
• Power supply: AC
• Operating voltage: 100–240 V
• Cable length: 8 m
• Enclosure protection rating: IP44
• LED module protection rating: IP64
• Tripod mount: included

Package Contents

• NOVQO WLL-01 painter’s lamp;
• an 8-meter power cord;
• carrying case;
• packaging.