NOVQO PRO LED Paint Light with Two LEDs

About the product

The NOVQO PRO dual-chip LED painter’s lamp helps reveal surface defects that are nearly invisible under normal overhead lighting. When mounted near a wall or ceiling, the lamp directs light along the surface, creating contrasting shadows around scratches, dents, bulges, and unevenness.

This lighting technique allows you to check the quality of the work before applying the final coat. The painter can promptly identify problem areas, sand them down again, or apply putty to specific spots. This helps reduce the need for rework and results in a smoother surface after painting.

Two LED chips produce an intense light beam with a luminous flux of 2,200 lm. The narrow beam angle of 120°×5° is specifically designed for skid lighting and surface inspection.

Five brightness levels

NOVQO PRO is equipped with a dimmer that allows you to adjust the light intensity according to the operating conditions:

• a very low level;
• low;
• average;
• high;
• maximum.

Lower brightness is convenient for working close to surfaces and in dimly lit rooms. The maximum setting helps you inspect large areas of walls and ceilings or work in the presence of ambient light.

Mains power ensures consistent brightness without the need to charge the battery or take forced breaks in operation.

What defects does the lamp help you spot?

• scratches left by sanding;
• pores and cavities in the putty;
• spatula marks;
• excess material;
• waves and changes in the plane;
• uneven joints in drywall;
• areas missed during sanding;
• plaster defects;
• drawbacks of a painted surface.

Benefits of NOVQO PRO

• two powerful LED chips;
• luminous flux of 2,200 lm;
• power: 26 W;
• 5 brightness settings;
• a narrow beam of light with an angle of 120°×5°;
• reliable operation from the power grid;
• aluminum housing for efficient heat dissipation;
• IP44 enclosure rating;
• IP64 light source protection;
• a comfortable handle with a soft grip;
• transparent protective screen;
• a long power cord;
• A sturdy case is included.

Scope of Application

The NOVQO PRO developing lamp is suitable for:

• inspections of the final coat of spackle;
• grinding quality control;
• preparing walls for painting;
• plaster inspections;
• inspection of drywall joints;
• inspecting walls and ceilings for defects;
• inspection of the surface after painting;
• Acceptance of painting and finishing work.

Protective screen

The front of the lamp is covered with a transparent protective glass that has a coating designed to make it easier to clean off dust and dirt. The screen protects the light-emitting elements during operation, transport, and storage.

Package Contents

• NOVQO PRO LED painter’s lamp;
• network cable;
• protective carrying case;
• instructions;
• packaging.

How to Use

Place the lamp as close to the wall or ceiling as possible and direct the light along the surface. Set the brightness to an appropriate level and gradually move the lamp across the work area.

For more accurate inspection, it is recommended to examine the surface from several angles. Any defects found can be marked with a pencil, and after they have been corrected, the area should be re-inspected under glancing light.