NOVQO PRO PLUS LED Painters’ Work Light with 3 LEDs, 39 W

About the product

The NOVQO PRO PLUS LED painter’s lamp with 3 LEDs is designed for professional surface inspection at all stages of finishing. Unlike conventional overhead lighting, it directs a narrow beam of light almost parallel to the wall or ceiling. As a result, even minor irregularities cast noticeable shadows and become clearly visible.

Three LED crystals produce a bright, wide beam of light. This design is better suited for inspecting large areas than the two-crystal version and allows for faster inspection of walls, ceilings, corners, and drywall joints.

With 39 W of power and a luminous flux of 2,600 lm, it provides sufficient brightness for work on a construction site, in a workshop, or in a room with ambient lighting. The 120°×5° beam angle helps highlight surface details without spreading the light too widely.

The AC power supply ensures consistent brightness throughout the workday without needing to charge the battery. The approximately 8-meter-long cable allows you to move the lamp freely along the wall and work at a considerable distance from the outlet.

The aluminum housing promotes efficient heat dissipation and is suitable for regular professional use. A comfortable handle with a soft grip makes it easy to carry and position the lamp, and the protective case helps ensure safe transport and storage of the tool.

What kinds of defects does the lamp help detect?

• scratches left by sanding;
• waves and local variations in the plane;
• pores and cavities in the putty;
• excess material and putty knife marks;
• uneven joints in drywall;
• areas missed during sanding;
• plaster defects;
• problems after dyeing;
• irregularities in the corners and along the edges.

Benefits of NOVQO PRO PLUS

• three powerful LED chips;
• power: 39 W;
• luminous flux of 2,600 lm;
• narrow beam angle of 120° × 5°;
• reveals minor defects in walls and ceilings;
• is suitable for monitoring large areas;
• reliable operation from the power grid;
• operating voltage 100–240 V;
• a cable about 8 m long;
• IP44 enclosure protection rating;
• IP64 protection rating for the light source;
• aluminum housing;
• a comfortable carrying handle;
• A sturdy carrying case is included.

Scope of Application

The NOVQO PRO PLUS lamp can be used for:

• inspections of the final coat of spackle;
• grinding quality control;
• preparing the surface for painting;
• inspection of plastering work;
• inspecting drywall joints;
• inspecting walls and ceilings for defects;
• inspection of the surface after painting;
• Acceptance of painting and finishing work.

Dimensions

Package Contents

• NOVQO PRO PLUS LED painter’s lamp;
• network cable;
• carrying case;
• instructions;
• packaging.

How to Use

Place the lamp as close to the wall or ceiling as possible and direct the light along the surface. Slowly move the lamp across the work area and observe the shadows, ripples, and variations in lighting.

For a more accurate check, we recommend:

• reduce the general lighting in the room;
• inspect the surface from several angles;
• mark any defects found with a pencil;
• re-inspect the area after sanding;
• Do not shine the light directly into your eyes.